What Is The Minimum Distance Between ProPress Fittings?

Distance Between Propress Fittings. Minimum distance between Pex fittings 2 by mwilles Plumbing As this method grows in popularity, we hear many questions about proper use. Table 32 Minimum distance between soldered fitting and ProPress fitting_____42 Table 33 Minimum insertion depths for ProPress Stainless ½" to 2" ____44 Table 34 Minimum insertion depths ProPress Stainless 2½" to 4.

Failure to provide this distance may result in an improper seal Please use the chart below to determine the minimum distance required between two Viega ProPress connections (sizes 1/2 in - 2 in) and Viega ProPress XL connections (sizes 2-1/2 in to 4 in.) Note that where the minimum distance is 0 it is particularly important to ensure the correct insertion depth of the tubing into each fitting.

Viega Propress Fitting Dimensions edu.svet.gob.gt

PI-PP 531438 1123 ProPress 1/2 to 4 7 While turning slightly, slide fitting onto the tube. For information on distances required between two ProPress fittings, see our previous blog post, What is the minimum distance between ProPress fittings? or for information on the distance requirements when pressing connections near existing soldered or brazed fittings, read our blog. Viega ProPress Insertion Depth Chart Tube Size ½" ¾" 1" 1¼" 1½" 2" Insertion Depth ¾" ⅞" ⅞" 1" 17/ 16"19/" 6 Refer to the chart below for minimum distance between fittings

Viega ProPress® Copper Fittings Now at The Home Depot Shop Online. For the most current Viega Viega ProPress 1/2" to 4" technical literature please visit www.viega.us Warning! Keep extremities and foreign objects away from press tool during pressing operation to prevent injury or incomplete press

DMNI Propress Fitting Copper Coupling Pack of 10 1” Zero Lead. For information on distances required between two ProPress fittings, see our previous blog post, What is the minimum distance between ProPress fittings? or for information on the distance requirements when pressing connections near existing soldered or brazed fittings, read our blog. I spoke with viega one time and was asking about minimum distance for 2" copper press, he said the 3/4" was mainly about fitting the jaws in there? Just anecdotal info, I get that propress obviously snarls the copper pipe pretty good